Tubine Oil

 Product Features

  • Thermalpower plants, steam turbine engines of ships, bearing in gas turbines, the reduction gear lubricants, hydraulic systems, compressors and hydraulic devices such widespread use of the control system.
  • Turbineoil with no additives and rust inhibitors (Rust Inhibitor) and antioxidants(Oxidation Inhibitor) adding turbine flow classification

 Performance Requirements

  • Oxidation stability
    • Secondlimit pressure high-temperature and high-pressure steam and gas turbines thatare driving around with.
    • Operationthe surface temperature of the bearing metal in the locally over 100 .
    • Oxidationin continuous use for a long time to heat, aging, reunion,
    • Oxidationunder air and in contact with moisture and contamination caused by rapid stirring.
    • Turbineoil oxidation when peroxide, acid, ester, etc. are produced,
    • Resultcause the pipe to block and filter insoluble sludge generation.
  • Rust
    • Rustcaused by moisture contamination. Southern rust occurrence of various problemsoccur  
  • Hangyu Mars
    • Poorwater separation stability of bearing wear, heat, and may cause problems, suchas promoting oxidation.
  • Vesicular
    • Bubblingduring forced circulation lubrication in the manner of turbine air entrainmentdue to the lubricating oil and the oil surface, 
    • Turbineoil oxidation causes, due to the destruction of bubbling lubrication,lubrication performance is required, such as happened to cause the follicular superior to others.
  • Extreme pressure
    • Turbinebearing lubrication and a reduction gear lubrication performance combined withextreme pressure being required depends on the system.

 Product Applications

    Usethe lubrication of the gas and steam turbines, bearings of the machine, use the reduction gear and fluid coupling such as purification system to lubricate the ring.

     

 Mineral Base Turbine OilSeries

Separation

Specific Gravity 15/4

Viscosity  cSt

Flash  Point
 

Total Acid mgKOH/g

Pour Point

Corrosive Test (100×3h)

40

100

THRBIN  32

0.871

32

5.3

210

0.01

-15.0

1a

THRBIN  46

0.877

46

6.8

210

-15.0

THRBIN  68

0.881

68

8.8

210

-12.5

THRBIN 100

0.885

100

11.4

210

-12.5

 Synthetic Polyalphaolefins Turbine Oil : PAO Basestock

Separation

Specific Gravity 15/4

Viscosity  cSt

Flash  Point

Total Acid mgKOH/g

Pour Point
 

Corrosive Test (100×3h)

40

100

THRBIN Syn  32

0.88

32.0

7.0

230

175

-35

1a

THRBIN Syn  46

0.88

46.0

9.0

230

175

-35

THRBIN Syn  68

0.88

68.0

12.0

230

175

-35

uridongne co., ltd. #40 Galji-ro, Namsan-myeon, Gyeongsan-si,Gyeongsangbuk-do, 38573, South Korea
TEL : +82-53-851-7117, FAX : +82-53-851-7116                                                 
www.euridongne.com        ideuk@naver.com 
This information is furnished without warranty, representation, inducement or license of any kind, except that it is accurate to the best of uridongne co,.ltd. knowledge or obtained from sources believed by uridongne co,.ltd. to be accurate. uridongne co,.ltd does not assume any legal responsibility for use or reliance upon same. Tests should be carried out only by chemists or chemically qualified technicians. Before using any chemical, read its label and Material Safety Data Sheet.