Refrigerating Machine Oil

 Product Features

  • Friction, wear, and the like where the particular sliding propertyrequired.
  • High-temperature, high-pressure, where the need to meet the extremelubrication conditions of the cryogenic.
  • Places that require replacement intervals and machine lubricant life
  • Properties of refrigerating machine oil, the type, optionally used inaccordance with the characteristics of the locations to vary the viscosity
  • Excellent low temperature properties, high temperature stability, highviscosity index, high extreme pressure performance and low volatility,
  • Low friction coefficient, anti-emulsification, oxidation stability, rustand corrosion protection, foam stability,
  • Clean sediment dispersion {Tan Mars (Ash) produced excellent anti},

 Product Category

  • Synthetic polyalphaolefin refrigeration oil: a linear alpha olefinoligomers (PAO)
  • Synthetic ester refrigerator oil:
    • Neo polyol ester (Neopolyol esters),
    • Fatty acid ester (Di-basic acid esters)
  • Synthetic poly-alpha-olefin and ester refrigerator oil: PAO & Estermixed use

 Product Applications

  • All refrigeration compressors (reciprocating, rotary, centrifugal),Airconditioning used effectively for refrigerators
  • Freon refrigerant such as ammonia available, sulfur dioxide (SO2) is notavailable.
  • Viscosity Selection: refrigerator manufacturer recommendations followed.
  • Refrigerator manufacturers temperature, pressure, like the properviscosity in consideration of the solubility of the refrigerant.
  • Pour the oil does not solidify at extremely low freezing line does notproduce wax at low temperatures minutes.
  • Excellent chemical stability and does not cause a chemical reaction ofthe foreign matter and is present in the circulatory system with the refrigerant or heat stability for a long time available.
  • Always keep it clean inside with a good clean dispersion systemperformance.
  • Excellent electrical insulation to minimize power consumption, even athigh temperatures, so maintaining proper viscosity lubrication and sealingaction is excellent for.
  • Enable mixed with mineral oil, for use as a mineral supplement used tocheck the freezer area high liquid level in the crankcase oil required.
  • Use mineral oil-based so than the mixed nature of this and the excellenthalogen refrigerant effectively at very low temperatures.

 Synthetic Polyalphaolefins Refrigerating Machine Oil : PAO Basestock

Separation

Viscosity
cSt  40

Flash Point

Pour Point

Viscosity Index

Ash
(%)

Moisture (ppm)

Total Acid Value mgKOH/g

Hi Freeze Syn 22

22

220

-40

135

0.01

0.01

0.05

Hi Freeze Syn 32

32

220

-40

135

Hi Freeze Syn 46

46

230

-40

138

Hi Freeze Syn 68

68

230

-40

141

Hi Freeze Syn 100

100

250

-40

142

 Synthetic Ester Basestock Refrigerating Machine Oil

Separation

Viscosity
cSt  40

Flash  Point

Pour Point

Viscosity Index

Ash
(%)

Moisture (ppm)

Total Acid Value mgKOH/g

Hi Freeze DE 22

22

220

-40

82

0.01

0.01

0.05

Hi Freeze DE 32

32.

220

-40

82

Hi Freeze DE 46

46

220

-40

81

Hi Freeze DE 68

68

230

-40

85

Hi Freeze DE 100

100

230

-40

86

 Synthetic Polyalphaolefins & Ester Basestock Refrigerating Machine Oil :
      PAO & Ester

Separation

Viscosity 
cSt  40

Flash Point

Pour Point

Viscosity Index

Ash
(%)

Moisture (ppm)

Total Acid Value mgKOH/g

Hi Freeze PE 22

22

220

-40

143

0.01

0.01

0.05

Hi Freeze PE 32

32.

220

-40

143

Hi Freeze PE 46

46

230

-40

141

Hi Freeze PE 68

68

230

-40

145

Hi Freeze PE 100

100

230

-40

142

uridongne co., ltd. #40 Galji-ro, Namsan-myeon, Gyeongsan-si,Gyeongsangbuk-do, 38573, South Korea
TEL : +82-53-851-7117, FAX : +82-53-851-7116                                                 
www.euridongne.com        ideuk@naver.com 
This information is furnished without warranty, representation, inducement or license of any kind, except that it is accurate to the best of uridongne co,.ltd. knowledge or obtained from sources believed by uridongne co,.ltd. to be accurate. uridongne co,.ltd does not assume any legal responsibility for use or reliance upon same. Tests should be carried out only by chemists or chemically qualified technicians. Before using any chemical, read its label and Material Safety Data Sheet.