Prosess Oil Series

 ProductOverview

  • Paraffinoil (Paraffinic Oils) : P-1, 2, 3, 4
  • Naphthenicfive days (Naphthenic Oils) :  No
  • ]Aromaticoils (Aromatic Oils) : No

 ProductFeatures

  • Fit the rubber and chemical processes refined Paraffinic ProcessOil,
  • Chemical: Paraffinic Side Carbon at least 50% of the entire carbonin Chaines,
  • Stable to light and heat for Color, light-colored and white goodsmanufacturing and optimum color change as the process of oil products.
  • Aromatic oils, naphthenic Volatility is good compared to the oiland non-staining, robustness to cold.
  • Natural rubber, SBR, BR, EPDM, etc. can be used for almost allcombinations of the object.
  • Exothermic used for small vulcanized rubber products.

 Prosess Oil Series

Separation

Specific Gravity 15/4

Kinematic Viscocity cSt  40

Flash Point
 

Aniline Point,

Pour Point
 

Color
ASTM

Corrosive Test (100×3h)

Total Acid Value mgKOH/g

P-1

0.865

7.30

165

80

-17.5

L0.5

1a

0.01

P-2

0.867

22.5

220

92

-17.5

L0.5

1a

0.01

P-3

0.782

45.7

210

115

-17.5

L1.5

1a

0.01

P-4

0.875

96.0

230

110

-17.0

L1.5

1a

0.01

uridongne co., ltd. #40 Galji-ro, Namsan-myeon, Gyeongsan-si,Gyeongsangbuk-do, 38573, South Korea
TEL : +82-53-851-7117, FAX : +82-53-851-7116                                                 
www.euridongne.com        ideuk@naver.com 
This information is furnished without warranty, representation, inducement or license of any kind, except that it is accurate to the best of uridongne co,.ltd. knowledge or obtained from sources believed by uridongne co,.ltd. to be accurate. uridongne co,.ltd does not assume any legal responsibility for use or reliance upon same. Tests should be carried out only by chemists or chemically qualified technicians. Before using any chemical, read its label and Material Safety Data Sheet.