Quenching Oil : Heat Treating Oil

 ProductFeatures

Cure for quenching of hard material, alloy steel, carbon steel, cast iron, applied to various heat treatment of steel products.

 ProductFeatures

  • InitialQuenching speed is fast while passing through the vapor film (formation) stage and the cooling stage,
  • If youpass the lowest cold zone (convection stage) there is a slow cooling has thehighest hardness values characteristic deformation and residual stresses are minimized,
  • Reduce toa minimum the deposition castle (the deposition resistance) is good because the consumption of heat-treated Yongyu low viscosity for easy removal when the alkaline cleaning residue,
  • Excellentthermal stability, long life Yongyu heat treatment under normal workingconditions.

  ó(Mineral Quenching Oil)

Separation

Specific Gravity 15/4

Viscosity cSt 40

Flash  Point

To burn
 

Cooling performance

Others

Characteristic temperature

Cooling sec. (800~400 )

A 101

0.870

15

210

230

620

2.80

Room temperature

A 201

0.875

22

214

250

610

3.71

A 301

0.891

460

310

365

680

5.20

high temperatures

 뼺 ó (Water-soluble Quenching Oil)

Separation

Specific Gravity 15/4

Viscosity cSt  40

pH

Apply material

Concentrations
(%)

Others

Quench   B

1.08

300

9.5

Iron, aluminum

5~25

Substitute for oil
(PAG)

uridongne co., ltd. #40 Galji-ro, Namsan-myeon, Gyeongsan-si,Gyeongsangbuk-do, 38573, South Korea
TEL : +82-53-851-7117, FAX : +82-53-851-7116                                                 
www.euridongne.com        ideuk@naver.com 
This information is furnished without warranty, representation, inducement or license of any kind, except that it is accurate to the best of uridongne co,.ltd. knowledge or obtained from sources believed by uridongne co,.ltd. to be accurate. uridongne co,.ltd does not assume any legal responsibility for use or reliance upon same. Tests should be carried out only by chemists or chemically qualified technicians. Before using any chemical, read its label and Material Safety Data Sheet.